{"id":3176,"date":"2026-07-26T22:24:46","date_gmt":"2026-07-26T22:24:46","guid":{"rendered":"https:\/\/landmarkfirearms.com\/ca\/?post_type=product&p=3176"},"modified":"2026-07-26T22:25:03","modified_gmt":"2026-07-26T22:25:03","slug":"top-brass-premium-reconditioned-once-fired-brass-40-sw","status":"publish","type":"product","link":"https:\/\/landmarkfirearms.com\/ca\/product\/top-brass-premium-reconditioned-once-fired-brass-40-sw\/","title":{"rendered":"Top Brass Premium Reconditioned Once Fired Brass 40 S&W"},"content":{"rendered":"
\n

Buy Top Brass Premium Reconditioned Once Fired Brass 40 S&W<\/h1>\n

Product Overview<\/h2>\n
\n
\n
\n

Buy Top Brass Premium Reconditioned Once Fired Brass 40 S&W. Top Brass specializes in purchasing once-fired military brass from the Department of Defense and performing every step necessary to bring it back to ideal reloading condition. Stringent inspection processes at every step ensures the tightest tolerances and most consistent product possible with once-fired brass, no matter the caliber. The thorough visual inspection process prior to packaging helps to make sure you get only the highest quality product so you can buy with confidence. This is 100% fully processed & reconditioned Brass. This is not loaded ammunition.<\/p>\n

 <\/p>\n

Brass Preparation:\u00a0<\/b>With bulk rifle brass you may sometimes notice a few case mouths are \u201cout of round\u201d or slightly dented below the shoulder.\u00a0 These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.\u00a0 Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.\u00a0 Buy Top Brass Premium Reconditioned Once Fired Brass 40 S&W. Minor dents are normally removed in the first firing and will not affect case life or performance.\u00a0 On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.\u00a0 With some smaller caliber cases you may notice the case mouths to be slightly belled.<\/p>\n

With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. \u00a0To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.\u00a0 To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth. Buy Top Brass Premium Reconditioned Once Fired Brass 40 S&W<\/p>\n

 <\/p>\n

Features<\/b><\/u><\/b><\/p>\n